Language
   deutsch 
   english 
   français 
   español 

 

  Imprint  

 

  Contact  

 

  www.vega.com  

 VEGAPULS 68: The specialist for extreme application conditions

Heat, dust, height: elegantly overcome

VEGAPULS 68’s application range also covers the most extreme level measuring conditions in bulk solids. The instrument delivers reliable level data even under high temperatures, such as in steel production.Dusty conditions in power plant coal processing facilities or in building material storehouses do not bother VEGAPULS 68 in the least. The wide dynamic range of the sensor also opens up new possibilities for applications with powders and granulates in the food and chemical industries.

Very high sensitivity through improved technology

Thanks to optimised VEGA radar technology, the sensor of VEGAPULS can process signals up to a thousand times smaller than those normally handled by conventional radar instruments. This high sensitivity enables measuring ranges up to 70 m, even for products with poor reflection characteristics.

 
VEGAPULS 68
with parabolic antenna
VEGAPULS 68
with horn antenna

 

Measuring range up to 70 m up to 70 m
Temperature -40 … +200 °C -40 … +200 °C
Pressure 3 bar 40 bar
Antennas Parabolic antenna Horn antenna
Swivelling mechanism Via mounting flange Via mounting flange
Voltage supply 4 … 20 mA/HART,
Profibus PA,
Foundation Fieldbus
4 … 20 mA/HART,
Profibus PA,
Foundation Fieldbus
Antenna diameter 245 mm 40 mm, 48 mm, 75 mm, 95 mm
Beam angle 22°, 18°, 10°, 8°
Process fitting Thread from 1½" Thread from 1½"
Flange from DN 50 / ANSI 2" Flange from DN 50 / ANSI 2"
   
Technology


(1) Separable antenna system
(2) Parabolic reflector
(3) Feed system

At the focal point of the parabolic reflector is the well-protected feed system. The radiated microwave signal is focussed by the antenna surface.


(1) Robust antenna transition
(2) Horn antenna
(3) Inflected antenna lip

Via a PTFE cone at the antenna junction the microwaves are radiated towards the horn antenna and then focussed in the direction of the product surface.

Advantages

 Mounting on small fittings possible through separable antenna system

 Insensitive to contamination and damage due to recessed feed system

 Optimum focussing

 Optimum focussing with small antenna diameters

 Easy mounting also in small vessel sockets

 High sensitivity especially at close range