Process pressure/Hydrostatic: Level and pressure measurements
Measuring principle The pressure measuring cell converting the pressure into a signal which can be evaluated electrically is the heart of the pressure transmitter. This pressure-dependent signal is converted by the integrated electronics into a standardized output signal. Different sensors are used to detect the pressure. The ceramic cell characterizes by an excellent long-term stability and high overload resistance. The metal cell covers even higher measuring ranges and use stainless steel as diaphragm material.
VEGABAR series 50
For standard applications This instrument series is developed for applications in all areas of industrial measurement technique with standard requirements to accuracy and ambient conditions.
VEGABAR series 60
For all industries This instrument series offers all options required for applications with highest requirements. Maximum accuracy, overload resistance, temperature resistance, corrosion resistance are the main points which must be met. In conjunction with application-optimized housing versions, sophisticated applications in the food processing, pharmaceutical, chemical and paper industry as well as water/waste water applications can be served.
VEGABAR series 70
For rough application conditions Due to the design, these pressure transmitters are particularly suitable for rough and wet ambient conditions in the food processing industry. The high protection allows steam blasting and permanent immersion. Also temperature changes such as during CIP/SIP cleaning are no problem thanks to the optimized housing design.
VEGAWELL
For gauge measurements These suspension pressure transmitters are designed for gauge measurement in water/waster applications. Different housing materials in combination with different cable materials offer all necessary options.
Netherlands
