|
|
|
Ballast water
|
|
Ballast water in the wing and double bottom tanks
The ballast water measurements in the wing and double bottom tanks go directly into the calculations for ship trim, draught and list. Since the measuring sites during operation on board are virtually inaccessible, reliability and stability are an absolute must. Pressure shocks, abrasive sand particles and brackish water place additional heavy demands on the instrumentation.
|
VEGABAR 66 for double bottom tanks
Thanks to its separate electronics, sensor housing in IP 69K and ceramic measuring cell, the VEGABAR 66 is the perfect sensor for harsh conditions. The mounting bosses, which are partly located under deck,are sealed with the stainless steel flanges and thus withstand corrosion or breaking waves. The separate electronics can be installed and ventilated in a protected area.
|
Der VEGAFLEX 61 in the wing tank
VEGAFLEX 61 offers reliable and safe measurement in the straight, vertical wing tanks. The guided microwave sensors are unaffected by breaking waves and abrasion. Temperature fluctuations in the tank do not influence the measuring result either. The housing is available in IP 68 version and does not need ventilation.
|
|
|
|
|
|
|
VEGABAR 66
- housing protection IP 68, IP 69K
- abrasion-resistant ceramic measuring cell
- high longterm stability
|
|
|
 |
VEGAFLEX 61
- independent of
product characteristics
- cable version up to
30 m (98 ft)
- easy adjustment
|
|
|
|
|
|
|
|
|
|
Netherlands
