Close

Contact form

Telephone consultation

You’d like to talk with an expert? You’re looking for the ideal sensor for your requirements? Then call us. We’ll be glad to help you select the right instrument.

You’ll be connected with your VEGA consultant via our switchboard:

+66 27009240

Service hotline

If you need service, feel free to call our 24-hour hotline, available seven days a week. Only normal call charges are incurred:

+49 1805 85 85 50

Distance
Meter Foot
Pressure
Bar kPa psi
Temperature
°C °F
Save

The display module PLICSLED can be ordered directly with the sensor or, alternatively, as a separate unit for retrofitting



PLICSLED – See what it’s about

With the new display module PLICSLED, the switching status of a sensor can be read from afar, even in strong sunlight. The module is compatible with all sensors of the plics® family with relay output: VEGASWING series 60, VEGAVIB series 60, VEGAWAVE series 60, VEGACAP series w60 and VEGAMIP series 60.

Since external wiring is unnecessary, the time needed for installation is reduced to a minimum. Power is supplied via the relay electronics. The second relay output is used to control the switching status display. Depending on the module version, the switching status is displayed in the colour combination red-green or yellow-green.

PLICSLED is installed directly inside the plics® sensor housing which gives it a high degree of protection from dust and water ingress.


Personal contacts

Nadine Deck
Press Officer, Corporate PR
n.deck@vega.com
Beatrix Vollmer
Administration, Trade Press
b.vollmer@vega.com

About this article

Published on

Monday, February 1, 2016

Length

815 characters

Download