雷达传感器用于液体的持续性液位测量

Wireless adjustment of sensors and instruments via Bluetooth

Remote measurement value indication and adjustment of plics® sensors

External measured value display and adjustment for 4 ... 20 mA/HART sensors

Abgesetzte Anzeige zum Einsatz in 4 … 20 mA-Stromschleife

Magnetic pen for on-site adjustment

测量值显示和简单的调节控制功能

Measured value indication, simple control functions, remote enquiry of measured data. optimized for water/sewage water industry

测量值显示和简单的调节控制功能以及测量值远程应答，用于4 ... 20 mA/HART传感器

测量值显示和简单的调节控制功能以及测量值远程应答，用于2个HART传感器

测量值显示以及测量值远程应答，用于可达15个HART传感器

Transmission of 4 ... 20 mA signals for level signalling

Transmission of 4 ... 20 mA signals for level signalling

Measured data enquiry and remote parameter adjustment for a HART sensor

Single channel separator for 4 … 20 m/HART sensors

Double channel separator for 4 … 20 m/HART sensors

Single channel separator in two-wire technology for 4 … 20 mA sensors

Double channel separator in two-wire technology for 4 … 20 mA sensors

Pluggable overvoltage protection for supply and signal cables

Overvoltage protection for Profibus PA and Foundation Fieldbus circuits

Overvoltage protection for two-wire circuits

Overvoltage protection for Profibus PA and Foundation Fieldbus circuits

Overvoltage protection for two-wire circuits

Interface adapter between PC and VEGA instruments

Breather housing with ventilation filter

up to 8 RS45 pluggable

Simple segment coupler for up to 93.75 kbit/s DP-side

The adapter flange is a retrofitting part for these radar sensors for connection to flanges on the plant side

The rinsing connection is an accessory part for VEGAPULS WL 61, 61, 67 and 69 radar sensors.

For mounting of VEGA instruments.

For mounting of radar sensors VEGAPULS 61 and VEGAPULS WL 61.

The protective cover is an accessory or retrofit part for sensors from the VEGA plics® line of products.

Replacement housing for plics® instruments

The housing is a spare oart for sensors of the plics® family

The housing is a spare oart for sensors of the plics® family

The plug connector is an accessory part for sensors with single or double chamber housing. It is used as separable connection to power supply or signal processing.