Capsule filling
Level and point level measurement during the capsule filling process
|
|
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Vorratsbehälter
Measuring range up to:
1 m
Medium:
Wirkstoff, Rohkapseln, befüllte Kapseln
Process temperature:
+20 … +25 °C
Process pressure:
0 … 0 bar
Special challenges:
Kleine Füllstände, kleine Füllstandänderungen
Application
The empty raw capsules and the active ingredient pellets are stored above the filling machine. Reliable level measurement is required here to ensure a continuous supply to the process. The capsules are only lightly stuck together and can be easily sucked apart by a vacuum, so that the upper part separates from the lower part. The pellets are then filled into the lower part of the capsule. After filling, the capsules are transported to the collecting vessels via a hose system. A level detection system serves as overfill protection in these containers.
Your benefit
Reliable
Certified materials according to FDA and EC 1935/2004 regulations
Cost effective
Uninterrupted filling of the capsules thanks to reliable measurement
User friendly
Automatic filling through continuous monitoring of the containers
Recommended products
VEGAPOINT 31
Point level monitoring with capacitive point level sensor in the collecting containers for filled capsules
- Simple operation, including optical switching display
- Reliable detection of the limit level, independent of medium
- Compact design ideally suited for tight spaces
Measuring range - Distance
-
Process temperature
-40 ... 115 °C
Process pressure
-1 ... 64 bar
VEGAPULS 42
Level measurement with radar in the active substance reservoir and capsule reservoir
- The smallest level changes are reliably monitored in the small vessel
- Approved materials according to FDA and EC 1935/2004 ensure hygienic storage
- Compact design ideal for tight spaces
Measuring range - Distance
15 m
Process temperature
-40 ... 130 °C
Process pressure
-1 ... 16 bar
