Oil skim tank
Level measurement and point level detection in the oil skim tank
|
|
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Tank
Measuring range up to:
3 m
Medium:
Various hydrocarbons and water
Process temperature:
+25 … +65 °C
Process pressure:
+1 … +7 bar
Special challenges:
Buildup, condensate
Application
Accurate measurement in oil skim and separation tanks is critical to product quality because there is complete separation of oil and gas possible. For liquid-liquid interface monitoring an accurate measurement helps control the quality of the separator’s output and thus helps to extend equipment life in downstream units by avoiding any potentially expensive impurity problems.
Your benefit
Reliable
Safe measurement unaffected by changing medium properties
Cost effective
Reliable control of the interface ensures effective operation
User friendly
Simple and easy setup
Recommended products
VEGAFLEX 81
Guided wave radar for interface control in the oil skim tank
- Non-moving parts eliminate maintenance needs
- Almost independent of buildup and condensate
- Immunity to the crude supply density changes offers reliable continuous level control
Measuring range - Distance
75 m
Process temperature
-60 ... 200 °C
Process pressure
-1 ... 40 bar
VEGASWING X
Vibrating level switch as overfill protection device in oil separation tanks
- Minimal maintenance required, as there are no moving parts
- Simple setup without adjustment
- Precise and reliable function through product-independent switching point
Measuring range - Distance
-
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Close