Close

Telephone consultation

You’d like to talk with an expert? You’re looking for the ideal sensor for your requirements? Then call us. We’ll be glad to help you select the right instrument.

You’ll be connected with your VEGA consultant via our switchboard:

+1 513 2720131

Service hotline

If you need service, feel free to call our 24-hour hotline, available seven days a week. Only normal call charges are incurred:

+49 1805 85 85 50


VEGA Americas service line

For assistance during normal business hours, call:

+1 844-VEGA-NOW (834 2669)

+1 800-367-5383 (Toll free)

(0)
Select shopping cart

There are already products in the shopping cart of your user account. Which shopping cart would you like to keep?

Guest shopping cart Existing cart

Blog

Radiometric Measurements and X-Ray Interference

10. February
X-ray interference with radiometric, or nuclear, instrumentation is a serious problem that can result in measurement errors and permanent damage to detectors. This white paper discusses users’ options for preventing errors, avoiding damage, and continuing to measure during X-ray interference events.

Radiometric responsibility from start to finish

10. December 2019
A VEGA Field Service Technician installs a MiniTrac 31 onto a pipe where the plant required a crucial density measurement.
VEGA is committed to radiometric instrumentation from licensing to removal. When a Kentucky paper mill closed its doors, VEGA was there to help remove all the radiometric sources in the facility. When the plant was purchased by new owners, VEGA helped to guide them through the radiometric purchasing process.

Measuring density with a non-contact measurement: Application of the month

09. December 2019
A MiniTrac 31 density sensor is mounted on a vertical pipe to monitor the lime and asphalt mixture flowing upward. The measurement is made without interfering with the process or process material.
Asphalt shingles are made of fiberglass, asphalt, and ceramic-coated minerals. Fiberglass mats are run through a machine, coating the mats in asphalt multiple times. Near the end of the process, the ceramic-coated minerals are added for protection and color. The ratio of these two ingredients changes the asphalt mixture’s adhesive properties and its density, so a density measurement is critical for monitoring the adhesive properties of the mixture as it’s applied.

The three R’s of radiometric measurements

08. October 2019
Illustration of VEGA radiometric device measuring liquid in a tank
The process automation industry has been using radiometric technology to make measurements for well over half a century now. The process automation industry has been using radiometric technology to make measurements for well over half a century now.

Measuring rock flow on a conveyor belt: Application of the Month

01. July 2019
VEGA radiometric sensor measuring mass flow on a conveyor belt
Mass flow measurements are a necessity at quarries, mines, paper mills, and power plants. These measurements are required for two main reasons: control and material transfer. Getting a reliable and accurate measurement ensures operations run smoothly without interruptions or slowdowns.

Radiometric mass flow measurement ensures precision charging in lime works

17. May 2019
The non-contact WEIGHTRAC 31 is ideal for harsh operating conditions and can also be relatively easily retrofitted to a conveyor belt.

Finding the optimum level in coke drums: Application of the month

02. May 2019
Using VEGA radiometric level measurement on coke drums
The delayed coking unit is arguably one of the most important applications in a refinery, and maximizing its efficiency with accurate and reliable level measurements gives operators the ability to safely increase throughput and minimize downtime. Since this is a volatile process in a large vessel with thick walls, radiometric instrumentation has been proven to be the best solution.

Avoid blockages in cyclone vessels: Application of the month

06. February 2019
Radiometric FiberTrac 31mounted on a cyclone vessel in a cement plant
Cement plants use cyclone vessels to create ingredients for cement production. Limestone and clay are heated to extremely hot temperatures before advancing to the next step in the process. These ingredients can accumulate and cause blockages, so operators need to monitor for plugged chutes in order to know when to keep the process running and when to shut it down for a cleanout.

Maintaining Your Mining Equipment

28. January 2019
Close-up of a MiniTrac at a mining operation
The mining industry has been around for a long time, and as a mine endures, it must adapt to the latest technologies to stay viable because mining equipment is susceptible to aging technology and wear and tear just like everything else. VEGA constantly strives to improve density measurement technology for the mining industry to help our mining customers make those necessary upgrades with ease.

Security in every application

Every industry places very specific requirements on the measurement technology it uses. VEGA sensors reliably fulfil the most demanding measuring tasks.

Technology Overviews

Explore the number of technologies VEGA uses to measure different types of levels in your tanks or vessels.