Clinker cooler
Level and pressure measurement in the clinker cooler
Level and pressure measurement in the clinker cooler
Process data
Measuring task:
Level and pressure measurement
Measuring point:
Conveyor belt
Measuring range up to:
1 m
Medium:
Burned clinker
Process temperature:
0 … +1500 °C
Process pressure:
0 … +100 mbar
Special challenges:
High temperatures, dirt and buildup
Application
To produce cement, the raw meal is burned to clinker in a long rotary kiln. After leaving the rotary kiln, the clinker has a temperature of up to +1300 °C and must be cooled down to a temperature of about +200 °C for further storage. To achieve this, the clinker bed is cooled with a continuous stream of air. Pressure monitoring is required in the lower part of the clinker cooler to make the cooling as effective as possible. The material height of the hot clinker, at over 1000 °C on the conveyor belt, also has to be reliably measured.
Your benefit
Reliable
Reliable monitoring of cooler process
Cost effective
Optimal cooling with minimum energy expenditure
User friendly
Maintenance-free measurement
Recommended products
VEGABAR 82
Pressure transmitter for pressure monitoring in the clinker cooler
- High plant availability thanks to rugged measuring cell
- Maintenance-free through front-flush mounting
Measuring range - Distance
-
Measuring range - Pressure
-1 ... 100 bar
Process temperature
-40 ... 150 °C
VEGAPULS 6X
Non-contact level measurement with radar in the clinker cooler
- Reliable measurement despite extremely high media temperatures
- Effective antenna cooling via blower or compressed air
- Long service life by utilising a temperature-resistant antenna system
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Blog Articles
Close