Chemical tank
Level measurement and point level detection in chemical tanks
|
|
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Container
Measuring range up to:
7 m
Medium:
Chemicals
Process temperature:
+10 ... +30 °C
Process pressure:
+1 … +3 bar
Special challenges:
Chemical resistance, measurement through plastic lid
Application
Chemical tanks guarantee the supply of raw materials for ongoing processes. The plant operator needs exact level readings from the containers at all times to be able to ensure punctual replenishment. An additional level switch protects against overfilling.
Your benefit
Reliable
Reliable measurement right through the container top
Cost effective
Long service life thanks to high chemical resistance
User friendly
Simple mounting
Recommended products
VEGAPULS 21
Continuous level measurement with radar for inventory monitoring and dosing
- Maintenance-free operation using 80 GHz non-contact radar technology
- Exact measuring results, independent of medium, process and operating conditions
- Highly resistant materials ensure a long service life
- With plastic containers, measurement from the outside, right through the vessel top, is possible
Measuring range - Distance
15 m
Process temperature
-40 ... 80 °C
Process pressure
-1 ... 3 bar
Mounting accessories
Mounting bracket with adjustable sensor mounting
- Adjustable sensor mounting bracket allows easy installation and alignment of sensors
- Weatherproof and robust thanks to all 316L stainless steel construction
Materials, wetted parts
316L
VEGASWING 63
Redundant point level detection for overfill protection
- Highly resistant materials enable use in aggressive media
- Product-independent switching point guarantees exact detection of limit level
- Maintenance-free operation increases system availability
Process temperature
-50 ... 250 °C
Process pressure
-1 ... 64 bar
Version
Standard
Hygienic applications
with gas-tight leadthrough
with tube extension
with temperature adapter
VEGATOR 121
Single-channel controller for point level detection
- Comprehensive monitoring: detects short-circuit and measuring line break - as well as any sensor malfunction
- Simple, convenient SIL and WHG proof-testing with function test button
- Easy mounting via DIN carrier rail as well as detachable, coded terminals
Protection rating
IP20
Input
1 x sensor input two-wire 8/16 mA
Output
1 x operating relay (SPDT)
Optionally 1 x fail safe relay output (SPDT)
