Storage tank for wet strength agent
Level measurement and point level detection in the storage tank for wet strength agent
|
|
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Tank
Measuring range up to:
5 m
Medium:
Wet strength agent
Process temperature:
+20 … +40 °C
Process pressure:
0 … 0 bar
Special challenges:
Aggressive, water contaminating medium, high importance on the availability of the measurements
Application
Wet strength agents are polymeric additives that increase the water resistance particularly of hygienic and specialty papers. These are applied in the paper machine via a size press or spraying device. Because of their high pH value, these substances are stored in double-walled GRP (glass reinforced plastic) tanks. For safety and operational reasons, multiple level measurements are needed in these tanks.
Your benefit
Reliable
Reliable filling with overfill protection and leak sensors
Cost effective
Maximum utilization of the container volume thanks to continuous level measurement
User friendly
Direct reading of the measured value at the additive station
Recommended products
VEGAPULS 31
Level measurement with radar in the wet-strength agent storage tank
- Exact measurement, unaffected by temperature and medium composition
- High measuring accuracy even at low filling levels
- Maintenance free, thanks to a non-contact level measurement
Rango de medición - Distancia
20 m
Temperatura de proceso
-40 ... 80 °C
Presión de proceso
-1 ... 3 bar
VEGASWING 63
Vibrating level switch as overfill protection in the storage tank
- Simple function test via keystroke
- WHG-approved instrument provides legal certainty
Temperatura de proceso
-50 ... 250 °C
Presión de proceso
-1 ... 64 bar
Versión
Estándar
Aplicaciones higiénicas
Pasamuros hermético al gas
con prolongación de tubo
con adaptador de temperatura
Close