Close

Contact form

Telephone consultation

You’d like to talk with an expert? You’re looking for the ideal sensor for your requirements? Then call us. We’ll be glad to help you select the right instrument.

You’ll be connected with your VEGA consultant via our switchboard:

+1 513 2720131

Service hotline

If you need service, feel free to call our 24-hour hotline, available seven days a week. Only normal call charges are incurred:

+49 1805 85 85 50


VEGA Americas service line

For assistance during normal business hours, call:

+1 844-VEGA-NOW (834 2669)

+1 800-367-5383 (Toll free)

Always reliable measurement, even with build up and deposits

Optimized signal processing makes VEGAPULS 64 independent of buildup.

In the past, contactless level sensors had to be cleaned at regular intervals or freed of deposits by means of a rinsing connection or removal for hand cleaning. With many conventional sensors, buildup or condensation on the process fitting reduces the reliability of the measuring results. Especially in small containers, performance compromises often had to be made.

The solution
The antenna system of VEGAPULS 64 is encapsulated in PTFE or PEEK, so there are no cavities or crevices in which product can accumulate. The surface of the material is very finely processed with diamond tools, which also considerably reduces product adhesion. In addition, special software algorithms filter out interference caused by buildup on the antenna system. Thanks to the high dynamic range of the sensor, signal attenuation caused by product deposits is largely compensated. This allows the level to be reliably detected even with contamination on the sensor.


Always reliable measurement, even with build up and deposits

The benefits:
  • High measurement certainty, even with product deposits collecting during operation
  • Measurement independent of condensation and system quickly available after cleaning cycles
  • Non-contact measurement enables maintenance-free operation
Expert tip:
Extreme product buildup due to condensation or crystallization on the sensor can be significantly reduced if the flange is provided with insulation. Thermal bridges are thus avoided and deposits kept to a minimum.
VEGAPULS 64

Comments ({{comments.length}})

This article has no comments yet. Write the first one now!

{{getCommentAuthor(comment, "Anonymous")}} ({{comment.timestamp | date : "dd.MM.yyyy HH:mm" }})

{{comment.comment}}


Write a comment

This field is mandatory
This field is mandatory
This field is mandatory Invalid email address
This field is mandatory
captcha
This field is mandatory
Invalid captcha An error has occurred. Please try again.