Liquid waste buffer tank
Level measurement and point level detection in buffer tanks for liquid waste
|
|
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Tank
Measuring range up to:
8 m
Medium:
Acids and alkalis
Process temperature:
+10 … +30 °C
Process pressure:
0 … +16 bar
Special challenges:
Frequently changing media, media with different dielectric constants
Application
In preparation for proper disposal, liquid wastes that arise in the production of pharmaceuticals are temporarily stored in buffer tanks. These potentially hazardous mixtures consist of diverse media with very different properties including dielectric conductivity (dielectric constant) and density. For optimal storage, reliable and accurate level measurement is required. Point level detection ensures overfill and dry run protection.
Your benefit
Reliable
Dependable protection against overfilling
Cost effective
Optimal utilization of the container volume
User friendly
Simple setup and commissioning
Recommended products
VEGAPULS 6X
Level measurement with radar in liquid waste buffer tanks
- Measurement down to the tank bottom, even in media with low dielectric constant
- Long service life thanks to highly resistant materials
- Due to false signal suppression, measuring result is not affected by agitators
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
VEGASWING X
Vibrating level switch for dry run protection in a buffer tank for liquid waste
- Universally applicable as overflow and dry-run protection for almost all liquid applications
- Precise point level detection thanks to adjustment-free, media-independent switching point
- Highly resistant materials and coatings enable use in a wide variety of media
- Reliable limit level detection in accordance with SIL2 and WHG, as well as simple proof testing at the push of a button or via Bluetooth
Measuring range - Distance
-
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Close