Intermediate hazardous waste storage tank
Level measurement and point level detection in an intermediate storage tank
Level measurement and point level detection in an intermediate storage tank
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Tank
Measuring range up to:
15 m
Medium:
Lacquers, paints, thinners
Process temperature:
+5 … +40 °C
Process pressure:
0 … 0 bar
Special challenges:
Outgassing, agitators, changing composition
Application
Both chemical and thermal processes are used to treat hazardous waste. For efficient processing, the flow rate through the processing facility must be kept constant. To facilitate this, hazardous wastes such as varnishes, paints and thinners are buffered in tanks. Agitators prevent clumping and settling of the solids contained in the mixture. Reliable level measurement ensures continuous waste processing is maintained.
Your benefit
Reliable
Reliable measurement, even with vapours and agitators in motion
Cost effective
Uninterrupted waste processing
User friendly
Non-contact measurement for all hazardous wastes
Recommended products
VEGACAP 64
Capacitive limit level detection in the intermediate storage tank
- Overfill protection for the tank, dry run protection for pump and agitator
- Adjustment-free and unaffected by buildup
- Robust and maintenance-free thanks to proven measurement technology
Measuring range - Distance
-
Process temperature
-50 ... 200 °C
Process pressure
-1 ... 64 bar
VEGAPULS 6X
Level measurement with radar in the intermediate storage tank
- Reliable measurement, even under difficult process conditions
- Precise measuring results, small blocking distance
- Unaffected by product surface turbulence caused by agitators
- Chemically resistant PTFE-encapsulated antenna System
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Close