Fuel tanks
Level measurement and point level detection in fuel tanks
|
|
Dados do processo
Tarefa de medição:
Level measurement and point level detection
Ponto de medição:
Tank
Faixa de medição até:
5 m
Produto:
Fuel (diesel / petrol)
Temperatura do processo:
0 … +40 °C
Pressão do processo:
0 … 0 bar
Desafios especiais:
Geometry of the tank
Área de utilização
The fuel tanks are some of the most important on board. They store a variety of fuels; diesel for the main engine and power generators, petrol for jet skis and dinghies, even aviation fuel for the helicopter. Level measurement ensures optimum availability of fuel at all times. An additional overfill protection system also ensures maximum safety for the environment.
Sua vantagem
Reliable
Maximum safety for humans and the environment
Cost effective
Precise measurement in all fuel tanks
User friendly
Maintenance-free, reliable operation
Produtos recomendados
Hydrostatic, Vibration
Guided Wave Radar, Vibration
VEGASWING 61
Vibrating level switch as overfill protection in the fuel tank
- Reliable detection of the level, regardless of media properties
- Simple side mounting
- Adjustment and maintenance-free operation
Faixa de medição - Distância
-
Temperatura do processo
-50 ... 250 °C
Pressão do processo
-1 ... 64 bar
VEGAWELL 52
Hydrostatic level measurement in fuel tanks
- Rugged ceramic-capacitive CERTEC® measuring cell
- Simple installation from the top or side
- Highly chemically resistant FEP cable
Faixa de medição - Pressão
0 ... 60 bar
Temperatura do processo
-20 ... 80 °C
Pressão do processo
-
VEGASWING 61
Vibrating level switch as overfill protection in the fuel tank
- Reliable detection of the level, regardless of media properties
- Simple side mounting
- Adjustment and maintenance-free operation
Faixa de medição - Distância
-
Temperatura do processo
-50 ... 250 °C
Pressão do processo
-1 ... 64 bar
VEGAFLEX 81
Continuous level measurement with guided radar in the fuel tank
- Universally applicable for all media
- Precise level measurement under all process conditions
- Rod or cable design allows for easy installation
Faixa de medição - Distância
75 m
Temperatura do processo
-60 ... 200 °C
Pressão do processo
-1 ... 40 bar