Reversing conveyor
Level measurement in the discharge area of the gypsum conveyor
|
|
Process data
Measuring task:
Level measurement
Measuring point:
Wet gypsum storage hall
Measuring range up to:
15 m
Medium:
Gypsum
Process temperature:
-40 … +50 °C
Process pressure:
0 … 0 bar
Special challenges:
Dust generation
Application
The gypsum extracted from the exhaust gases in the flue gas desulphurisation unit is transported by conveyor belts to the wet gypsum storage hall. The stockpile loading is carried out by a reversing conveyor, which is able to, when a desired filling height is reached, traverse forward or back to another discharge position. For safety reasons, there are two redundant radar sensors at the end of the reverse conveyor belt to monitor the stockpile filling height during discharge.
Your benefit
Reliable
Reliable function, even during discharge/filling
Cost effective
Simple installation onto the existing infrastructure
User friendly
Maintenance-free operation
Recommended products
VEGAPULS 6X
The radar sensors monitor the filling height of the stockpile and control the movement and position of the reversing conveyor
- High plant availability with wear and maintenance-free measuring instrument
- Unaffected by condensation, dust and noise
- Approvals according to dust-Ex and SIL2
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
