Preparation tank for solvents
Level measurement in the preparation tank for solvents
|
|
Process data
Measuring task:
Level and pressure measurement, point level detection
Measuring point:
Tank
Measuring range up to:
1.4 m
Medium:
Solvents
Process temperature:
-10 … +150 °C
Process pressure:
-1 … +10 bar
Special challenges:
Condensation, media with low dielectric constant
Application
The various solvents and intermediate carrier materials have to be first prepared before they proceed onto further production steps. This is usually carried out in bioreactors and fermentation tanks. These vessels are enclosed with a steam heating jacket to regulate the temperature inside the mixing process. The level measuring system is needed to control filling and discharge as well as monitor during the process. Level detection prevents the tank from overfilling or running empty.
Your benefit
Reliable
Approved materials in compliance with FDA and EC 1935/2004
Cost effective
Maintenance-free operation
User friendly
Simple installation
Recommended products
VEGAPULS 6X
Non-contact level measurement in the preparation tank for solvents
- Strong focusing allows reliable measurement at close range and at the bottom of the tank as well as in media with low dielectric constant
- The front-flush, encapsulated antenna is easy to clean and resistant to the extreme conditions of the SIP and CIP processes.
- Measurement not affected by condensation and internal fixtures
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
VEGABAR 38
Pressure monitoring with IO-Link connection in the supply line of the heating medium
- Reliable measurement thanks to fast response time
- Robust ceramic CERTEC® measuring cell guarantees a long service life
- Simple operation thanks to VDMA menu structure and integrated display
Measuring range - Pressure
-1 ... 60 bar
Process temperature
-40 ... 130 °C
Accuracy
0.3 %
VEGASWING X
Vibrating level switch for overfill and dry run protection
- Universally applicable for almost all liquids
- Additional safety through an additional glass feedthrough seal that ensures a further separation from the process (Second Line of Defense)
- Simple setup without adjustment
- Simple function test at the push of a button or via Bluetooth during operation ensures increased system availability
Measuring range - Distance
-
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Close