BTX separators
Level measurement and point level detection in the BTX separators
|
|
Process data
Measuring task:
Level measurement and point level detection
Measuring point:
Tank
Measuring range up to:
3 m
Medium:
Toluene, benzene, xylene and water
Process temperature:
+25 … +60 °C
Process pressure:
+1 … +10 bar
Special challenges:
Changing media properties and emulsions
Application
Precise interface monitoring in refinery separators is critical to product quality because it confirms there is complete separation. For liquid-liquid interface in a BTX (benzene, toluene, xylene) separator, an accurate measurement helps control the quality of the separator’s output and thus helps to extend equipment life in downstream units by avoiding potentially expensive operating issues.
Your benefit
Reliable
Redundant measurement for highest safety standards
Cost effective
Maintenance-free operation
User friendly
Easy installation
Recommended products
VEGAFLEX 81 and magnetic level indicator
Guided wave radar sensor and magnetic level indicator for monitoring of the separation layer
- Guided wave radar and magnetic level indicator provide redundancy
- Dual measurement capability provides both total level and interface level
- Continuous reporting increases operational efficiency
Measuring range - Distance
75 m
Process temperature
-60 ... 200 °C
Process pressure
-1 ... 40 bar
VEGASWING X
Vibrating level switch for overfill protection in separators
- Precise point level detection thanks to adjustment-free, media-independent switching point
- Simple setup without adjustment
- Reliable limit level detection in accordance with SIL2 and WHG, as well as simple proof testing at the push of a button or via Bluetooth
Measuring range - Distance
-
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
Blog Articles
Close