Incinerator
Measurement of waste layer thickness and air flow in the incinerator
Measurement of waste layer thickness and air flow in the incinerator
Process data
Measuring task:
Pressure and level measurement
Measuring point:
Incinerator
Measuring range up to:
30 m
Medium:
Burning household and commercial waste
Process temperature:
+20 … +1000 °C
Process pressure:
0 … 0 bar
Special challenges:
Extremely high temperatures, measurement through open flames
Application
To ensure that the waste burns completely, temperatures up to 1000 °C must be maintained. For this purpose, large amounts of primary air from below and secondary air from above are blown in. Air quantity and air pressure must be precisely measured. Also an optimum waste layer thickness on the combustion grate is required for uniform combustion.
Your benefit
Reliable
Reliable measurement of the layer thickness and air flow, even at high combustion temperatures
Cost effective
Continuous operation and uniform combustion
User friendly
Maintenance-free measurement
Recommended products
VEGABAR 82
Pressure transmitter for measurement of the combustion air
- High overload and vacuum resistance
- Long-term stability via dry measuring cell
- High measurement accuracy, even with very small measuring ranges
Measuring range - Distance
-
Measuring range - Pressure
-1 ... 100 bar
Process temperature
-40 ... 150 °C
VEGADIF 85
Measurement of flow rate and pressure of the combustion air using differential pressure transmitter
- Exact measurement, even with very small pressure differential
- High overpressure and vibration resistance thanks to integrated overload diaphragm
- Universally applicable, with a wide selection of measuring ranges and process fittings
- High operational reliability through SIL 2/3 sensor
Measuring range - Pressure
-40 ... 40 bar
Process temperature
-40 ... 105 °C
Process pressure
-1 ... 400 bar
VEGAPULS 6X
Non-contact level measurement with radar in the incinerator
- Accurate measurement and precise feed control
- High plant availability thanks to wear and maintenance-free instrumentation
- Unaffected by smoke, dust and noise
Measuring range - Distance
120 m
Process temperature
-196 ... 450 °C
Process pressure
-1 ... 160 bar
