Close

VEGASON S62

Ultrasonic sensor for continuous level measurement for measuring ranges up to 8 m

Measures liquids up to 8 m and bulk solids up to 3.5 m away


Application area

Output signal 4 ... 20 mA, Ex approval and PLICSCOM optional.
The VEGASON S 62 is an ultrasonic sensor for continuous level measurement of liquids or bulk solids. Typical applications are the measurement of liquids in storage tanks or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or silos. The sensor can be used in all industries. The non-contact measuring principle is independent of product features and allows a setup without medium.

For this instrument, new radar sensors with connection housing VEGAPULS 11, 21 or 31, or radar sensors with fixed connected cable VEGAPULS C 11, C 21, C 22 or C 23 are available as alternative.

Configure product

Configure product
Application
Technical specifications
Documentation
Accessories
Configure product

Application area

Application
VEGASON S 62 is suitable for level measurement of liquids and for use in small bulk solids vessels. The sensor is always mounted at the top. Typical applications are measurement of liquids in storage vessels or open sumps up to a height of 8 m and can also carry out flow measurement in open flumes or weirs. When using the sensor on bulk solids, the maximum measuring range is normally halved, but this depends on the amount of dust generated and the consistency of the bulk solid. Please contact us for advice if needed.
Technical specifications
Measuring range - Distance
8 m [Meter - Foot]
Process temperature
-40 ... 80 °C [°C - °F]
Process pressure
-0.2 ... 2 bar [Bar - kPa - psi]
Accuracy
± 4 mm
Materials, wetted parts
PVDF
Threaded connection
G2, 2 NPT
Seal material
EPDM
Housing material
Plastic
Protection rating
IP66/IP67
Output
4 … 20 mA
Ambient temperature
-40 ... 80 °C
Approvals
Scope
ATEX / Europe
Explosion protection
Intrinsic safety "i"
Display & adjustment
Adjustment
PLICSCOM
PC, PACTware and DTM
Indication
Display/adjustment module PLICSCOM

Drawing generator

Generate 2D and 3D drawings for your specific configuration.

Configure Now

Drawing generator

Generate 2D and 3D drawings for your specific configuration.

Configure Now

Further downloads for this product

All documents and software for this product can be found in our Download Center.

Show all downloads
Accessory
Our recommendation

PLICSCOM

PLICSCOM Steckbares Anzeige- und Bedienmodul

Measured value indication and adjustment of plics® sensors

Show Product

Counter nut

Mounting bracket

For wall mounting of VEGA instruments.

Show Product
Loading device data
Configuration is being created
Loading configuration
An error occured while sending the last request. Please try again. ({{httpErrorStatusCode}})

An error has occurred

An error occurred when starting the configurator. We have documented the error and are working on it.
Please try again later. Alternatively you can contact us directly.

Thank you very much for your understanding.

Settings
{{subGroup.subGroupName}}
Go to: {{activeGroup.nextGroup.groupName}}

Prices, delivery times & more

Log in to myVEGA to get the full functionality.

  • Prices & delivery times
  • Quotes & orders
  • 2D & 3D drawings
  • Save configurations

Register now