Close

VEGATOR 141

Single-channel controller for level detection

Transmission of 4 ... 20 mA signals for level signalling (single channel)
VEGATOR 141 - Single-channel controller for level detection
VEGATOR 141
VEGATOR 141 - Single-channel controller for level detection
VEGATOR 141

Application area

The VEGATOR 141 is a controller for level detection for continuously measuring 4 … 20 mA sensors. It evaluates the measured values of a sensor and delivers a relay switching signal according to the adjusted switching threshold. Hence simple control tasks can be solved. Typical applications are monitoring functions such as overflow and dry run protection as well as gauge monitoring. Optionally a false signal output is available.

Your benefit

  • Simple adjustment of the switching point with potentiometer
  • Simple installation though carrier rail mounting as well as detachable, coded terminals
  • Visible status indication via LED

Configure product

Configure product

All documents and software for this product can be found in our Download Center.

Show all downloads
Application
Technical specifications
Documentation
Accessories
Configure product

Other applications

Digester

Digester

Level measurement and point level detection of foam in the digester

To the application

Sludge granulate silo

Sludge granulate silo

Level measurement and point level detection in the sludge granulate silo

To the application

Lime silo

Lime silo

Level measurement and high level detection in the lime silo

To the application

Sludge dewatering

Sludge dewatering

Level detection of sludge and water

To the application
Technical specifications
Protection rating
IP20
Input
1 x 4 … 20 mA sensor input
Output
1 x operating relay (SPDT)
Optionally 1 x fail safe relay output (SPDT)
Ambient temperature
-20 ... 60 °C
Signal input (specify)
4 … 20 mA
Signal output (specify)
Operating relay
Fail safe relay
Approvals
Scope
ATEX / Europe
IEC / worldwide
NEPSI / China
INMETRO / Brazil
Ship approval
ABS
BV
CCS
GL
LR
RINA
SIL qualification
SIL2
Display & adjustment
Adjustment
DIP switch
Indication
LED

Drawing generator

Generate 2D and 3D drawings for your specific configuration.

Configure Now

Product catalog

Controllers and communication

    • EN
    • DE
    • CS
    • ES
    • FR
    • IT
    • NL
    • PL
    • PT
    • TR
    • ZH
Download

Specification sheet

VEGATOR 141

    • EN
    • US
    • DE
    • CS
    • DA
    • ES
    • FR
    • HU
    • IT
    • KK
    • NL
    • NO
    • PL
    • PT
    • SV
    • TR
    • UK
    • ZH
Download

Operating instructions

VEGATOR 141

    • EN
    • DE
    • CS
    • DA
    • ES
    • FR
    • HU
    • IT
    • KK
    • NL
    • NO
    • PL
    • PT
    • SV
    • TR
    • UK
    • ZH
Download

Drawing generator

Generate 2D and 3D drawings for your specific configuration.

Configure Now

Further downloads for this product

All documents and software for this product can be found in our Download Center.

Show all downloads
Loading device data
Configuration is being created
Loading configuration
Want to pick up where you left off?
Your latest configuration
{{lastConfiguration.code}}
{{getLastConfigurationDate()}}
Open configuration
or
Start new configuration
An error occured while sending the last request. Please try again. ({{httpErrorStatusCode}})

An error has occurred

An error occurred when starting the configurator. We have documented the error and are working on it.
Please try again later. Alternatively you can contact us directly.

Thank you very much for your understanding.

Settings
{{subGroup.subGroupName}}
Go to: {{activeGroup.nextGroup.groupName}}